Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorSenel, Sevket Murat
dc.contributor.authorKayhan, Ali Haydar
dc.contributor.authorPalanci, Mehmet
dc.contributor.authorDemir, Ahmet
dc.date.accessioned2024-05-23T12:04:22Z
dc.date.available2024-05-23T12:04:22Z
dc.date.issued2024en_US
dc.identifier.citationSenel, S. M., Kayhan, A. H., Palanci, M., & Demir, A. (2024). Assessment of Damages in Precast Industrial Buildings in the Aftermath of Pazarcık and Elbistan Earthquakes. Journal of Earthquake Engineering, 1-30.en_US
dc.identifier.issn13632469
dc.identifier.urihttps://doi.org/10.1080/13632469.2024.2336206
dc.identifier.urihttps://hdl.handle.net/20.500.12294/4104
dc.description.abstractTwo major earthquakes with moment magnitudes of 7.7 and 7.6 struck the districts of Pazarc & imath;k and Elbistan, causing thousands of deaths and severe damage. A lot of buildings located in 11 different cities were damaged or collapsed. In addition to urban areas, industrial regions were also affected and damaged by these earthquakes. In this study, the results of assessment studies performed in the industrial zones located in Malatya, Ad & imath;yaman, Kahramanmaras, Osmaniye, and Hatay cities are presented. The maximum seismic demands instrumented by the strong ground motion stations were first investigated. Then, the acceleration records obtained from the stations near the visited industrial zones were studied, and the spectral demands were compared to the code spectra. Obtained results have revealed that spectral acceleration and displacement demands are higher than that of design earthquake in many stations. Even in some stations, it was determined that the spectral demands, especially in the constant velocity region where the periods of precast industrial buildings are located, also exceeded the demand of the maximum earthquake of the code. After demand assessment studies, the structural properties of existing precast buildings are presented, and the reasons behind the damages are discussed. Site inspections have shown that connection failures are the most common type of damage observed. The overturning of roof girders and shear damage at corbels and beam ends are the typical forms of joint failures. Column flexural failures and other factors that cause the structural damage are discussed and explained. Non-structural damage was also determined in many buildings. Damage to suspended ceilings, facade cladding, products and equipment, and partition walls are the typical examples of non-structural damage observed. Reconnaissance studies have shown that the damaged building ratio in Kahramanmaras Turkoglu and Ad & imath;yaman Petrol industrial zones is significantly higher than in other regions visited. Damage distributions in Kahramanmaras Turkoglu and Ad & imath;yaman Petrol industrial zones, where comprehensive information was gathered, are presented and evaluated.en_US
dc.language.isoengen_US
dc.publisherTaylor and Francis Ltd.en_US
dc.relation.ispartofJOURNAL OF EARTHQUAKE ENGINEERINGen_US
dc.identifier.doi10.1080/13632469.2024.2336206en_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectPERFORMANCEen_US
dc.subjectDEMANDSen_US
dc.subjectTURKEYen_US
dc.subjectPrecast Industrial Buildingsen_US
dc.subjectKahramanmaras Earthquakesen_US
dc.subjectStructural Damageen_US
dc.subjectNon-structural Damageen_US
dc.subjectConnection Damageen_US
dc.titleAssessment of Damages in Precast Industrial Buildings in the Aftermath of Pazarcık and Elbistan Earthquakesen_US
dc.typearticleen_US
dc.departmentMühendislik ve Mimarlık Fakültesi, İnşaat Mühendisliği Bölümüen_US
dc.authorid0000-0002-9223-5629en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.institutionauthorPalanci, Mehmet
dc.authorwosidHMC-9113-2023en_US
dc.authorscopusid57193708269en_US
dc.identifier.wosqualityQ2en_US
dc.identifier.wosWOS:001215371000001en_US
dc.identifier.scopus2-s2.0-85192346145en_US


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster